Lunar Orbiter Image Recovery Project (LOIRP) Progress Report 19 February 2009

| 4 Comments

To: LOIRP Status
From: Dennis Wingo
Subject: Progress Report, Milestone ALERT! Folks Major milestones to report!

Demodulator

We have had a major milestone accomplished (well 98% of the way there). Figure 1 shows two framelets, from Lunar Orbiter II High Resolution image (we don't know which one yet). Figure 2 shows our favorite image, the Lunar Orbiter 1 image of the Earth with two framelets that were captured from the undemodulated tape. The framelets that are stitched together are from LO-1-102.

This proves that we can demodulate random tapes from more than one Lunar Orbiter mission but it has also shown us what we have to do to get to full production mode. The demodulator must be ultra stable, however, the drive is still not to its original specification and so there is jitter in the signal. The new capstan motor should fix this as we have new belts, bearings, and the motor has been balanced back to its original specification. However, the the motor driver assembly that we built to use during the calibration process blew some power transistors and he had to come back down (he is in San Francisco) and pick up one of our spares. We have been building spares for the production process to keep the machines running and this is helping with the refurb process as well! We will have the capstan motor on Saturday and will install and align it on Monday.

Al Sturm is going back and doing some further refining of the demodulator design to account for some loss of demodulator lock on the signal found during the testing yesterday. This accounts for the striping that you see on the Lunar Orbiter II framelets that we captured and processed shown on the next pages. We have not found out what frame this is and it is possible (as I have looked through all of the LO-II images) that we have one that is not in the current database as one image is missing from the LPL database that may be ours. If this is true, then we are helping to fill out the complete LO image database for NASA. One final note, look at the final image and see the boulders sitting on the surface at the edge of the crater!

Software

Gordon Woodcock has done some test automated assemblies of a couple of framelets which looks like it will result in a workable and at least semi-automated process for framelet reassembly.

Second Machine

We are continuing to install new caps and refurbished subassemblies that Ken and I have modified for better operation. It is our plan to finish the motor replacements, upgrades, and testing on the primary machine to get it ready for production before finishing up the second drive. This is as our experience gained on the first drive and the design upgrades will make the second drive relatively easy to get going after the learning curve of working on the first machine.

Images

Figure 1 is an unknown high resolution image from Lunar Orbiter II. These are individual framelets and we are still searching to figure out which whole image that it is attached to. The lines through the images are artifacts from the demodulator that is not quite 100% working - yet. The image has boulders sitting on the surface quite easy to see. We have verified that the intrinsic resolution of these images is going to be very high, to be quantified further after we get the demod at 100% and the capstan motor replaced. Figure 2 is a composite from LO-I-102-H that we processed from the undemodulated tape.


Figure 1: Unidentified high resolution framelet from Lunar Orbiter II. Image LOIRP/NASA

Figure 2: composite from LO-I-102-H Larger image. Image LOIRP/NASA


Discussion

We are closing in on satisfying all of the milestones from this phase of our project and we are looking forward to getting the go ahead and funding to enter the production phase. It is our plan to take a series of new images with us to the Lunar and Planetary Science conference in Houston to show what can be done with data mining these old data sets. We expect to be able to digitize any tape at will by next week and have a set of images that are the high priority outputs. I am extremely proud of our team and what has been accomplished and look forward to providing this raw data and finished products for NASA's exploration and science efforts.

Respectfully Submitted

Dennis Ray Wingo

4 Comments

It is such a wonderful thing that these images are being preserved. I am afraid there is a whole lot of other information (video,photo and audio) from the apollo era that is also at risk of being lost forever. I have been to the Honeysuckle site where they have been preserving data. Great work by all!!

We have been listening to some extremely interesting audio from the DSIF (predecessor to the DSN) as the DSIF audio loops are on the tape on the audio channel as there was a microphone on the machine and it recorded everything on the audio channel. Interesting stuff that we are going to try and record. - Dennis Wingo

Great job guys! Congrats to the team. If you look at how expensive it would be to get an equivalent quality pass of photos from a modern lunar satellite, this project has to be one of the most cost effective explorations NASA has ever done.

I wonder how much more data is in the NASA digital archives awaiting ressurection by some rebuilt ancient data processing technology, now long extinct.

I have to ask, do you know what the resoution is of the extreme foreground of Figure 2? I'm curious how large are some of the small craters visble in the forground.

Thanks, and again, great work.

Paul

The resolution of the foreground of that image (The spacecraft was at 1147 km above the nadir) is probably around 50 meters. This was with the 24" (610mm) telescope on the spacecraft. - Dennis Wingo

Simply beautiful! Wonderful work there! Makes me want to go home and start that USB interface to my old 8" floppy drives. Interfacing old data devices to modern hardware is such sexy work.

Andrew

Great work!

Has there been consideration of using software demodulation, such as that used with the GNU radio project? http://www.gnu.org/software/gnuradio/

Good luck, and I hope to see improved contrast LO images of Galvani B for my Clementine feature comparison - some day.

LOIRP
- About
- Contact

Categories

 

RECOMMENDED BOOKS

Moonrush: Improving Life on Earth with the Moon's Resources
Moonrush: Improving Life on Earth with the Moon's Resources

The Kaguya Lunar Atlas: The Moon in High Resolution
The Kaguya Lunar Atlas: The Moon in High Resolution

Lunar Reconnaissance Orbiter Mission
Lunar Reconnaissance Orbiter Mission

Lunar Orbiter Photographic Atlas of the Near Side of the Moon
Lunar Orbiter Photographic Atlas of the Near Side of the Moon

The Far Side of the Moon: A Photographic Guide
The Far Side of the Moon: A Photographic Guide

The Clementine Atlas of the Moon
The Clementine Atlas of the Moon

The International Atlas of Lunar Exploration
The International Atlas of Lunar Exploration

Voices from the Moon: Apollo Astronauts Describe Their Lunar Experiences
Voices from the Moon: Apollo Astronauts Describe Their Lunar Experiences

Apollo: Through the Eyes of the Astronauts
Apollo: Through the Eyes of the Astronauts

Space News
- Moon Today
- SpaceRef

Social Media
- Facebook
- Twitter
- Google+

MoonViews

Monthly Archives

PARTICIPANTS
- NASA SSERVI
- Skycorp
- SpaceRef
LUNAR ORBITER
- Overview
- LPI Image Archive
- Documents

LUNAR MISSIONS
Scientific
- Apollo
- ARTEMIS - Chandrayaan-1
- Chandrayaan-2
- Chang'e-1
- Chang'e-2
- Clementine
- GRAIL - Kaguya
- Lunar Reconnaissance Orbiter
- LCROSS
- Luna
- Lunakhod
- Lunar Prospector
- Ranger
- SMART-1
- Surveyor
- Zond

Visit the MoonViews store